Zooz 700 Series Z-Wave Plus 0-10 V Dimmer ZEN54 | Z-Wave Hub Required (Sold Separately)

0-10 V LED DRIVERS ONLY: Use with 0-10 V LED drivers up to 200 mA only. Do NOT use with 120 LED bulbs!SPECIFICATIONS:Model Number: ZEN54Z-Wave Signal Frequency: 908.42 MHzPower: 120-240 VAC, 50/60 HzMax Load: 4 A, 480W at 120V, 960 W at 240VZ-Wave Range: Up to 300 feet line of sightDimensions: 1.5" tall, 1.4" wide, 0.7" deepOperating Temperature: 32-104° F (0-40° C)Installation and Use: Indoor only Will it work with my smart speakerSmart speakers are not Z-Wave controllers so you will need a compatible Z-Wave hub to control this device with voice commands.Smart speaker compatible Z-Wave hubs include:Z-Box Hubcompatible with SmartThingsHome Assistant (Z-Wave JS)HomeSeerHubitat

• Z-WAVE FOR 0-10 V LED DRIVERS: Control your 0-10 V LED drivers from your smartphone or automatically with smart rules. Instantly dim up or down, adjust brightness levels, and manage the length and intensity of light with ease. Z-Wave hub required, sold separately.
• GET MORE OUT OF IT: Customize your dimmer with minimum brightness and maximum brightness settings. Built-in relay to turn the LED driver on and off to accommodate 1-10 and 0-10 V drivers. SmartStart and S2 authentication offer a truly protected smart home.
• LONG RANGE READY: If your hub and automation software support Z-Wave Long Range, you'll get extended coverage without network lags and dropouts! And for traditional set-ups, the built-in signal repeater keeps your mesh networks stable and fast.
• EASY INSTALLATION: Pigtail wires included to save you time when wiring the dimmer for an hassle-free set-up. This product is backed by a lifetime US based support from Zooz and a 5-year warranty once registered.
• HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an updated Z-Wave hub to display correctly. It was tested to work well with the Z-Box Hub (recommended for Zooz devices), Hubitat with custom driver, Home Assistant (Z-Wave JS), and it's compatible with SmartThings through a custom edge driver (available through the Zooz support portal).