Wirenco 6 AWG White, Black and Red with 8 AWG Green THHN, Stranded Copper Cables (55 FT)

APPLICATIONS: THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). THHN-THWN-2 is permitted for new construction or rewiring for 600-volt applications. Applications requiring Type THHN or THWN-2, the conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90°C or not to exceed 75°C in oil or coolants. Applications requiring Type MTW conductor is appropriate for use in dry locations at 90°C, or not to exceed 60°C in wet locations or where exposed to oils or coolants. Applications requiring Type AWM conductor is appropriate for use at temperatures to not exceed 105°C in dry locations. Most common building wire used often on sub-panels, hot tubs & jacuzzis.FEATURES:THHN copper conductors are designed to be installed without application of a pulling lubricant. All sizes are rated gasoline and oil-resistant.MATERIALS:Jacket is heat and moisture resistant, colored polyvinyl chloride (PVC) insulation, with a clear nylon (polyamide) or UL-listed equal jacket, which provides abrasion resistance.Conductors are stranded soft drawn copper, per ASTM standardsSTANDARDS:- UL 83- UL VW-1- MTW per UL 1063- ASTM B1, B3, B8- Federal Spec A-A-59544SPECIFICATIONS:Conductor Size: 6 AWG THHNNumber of Strands: 19Insulation Thickness: 0.030 x 0.005 inchesOverall Diameter: 0.250 inches Net Weight: 0.09 lbs per footAmpacity: 75 AmpsConductor Size: 8 AWG THHNNumber of Strands: 19Insulation Thickness: 0.030 x 0.004 inchesOverall Diameter: 0.230 inchesNet Weight: 0.066 lbs per footAmpacity: 55 Amps

• Stranded Copper Conductors per ASTM Standards
• UL 83 and ULVW-1 Approved
• Covered by Heat and Moisture Resistant PVC Insulation, Providing Abrasion Resistance
• Suitable For Wet and Dry Applications, With Temperatures That Do Not Exceed 90 Degrees Celcius
• Primarily Used For Services, Feeders and Branch Circuits in Commercial or Industrial Applications