Wind Speed Direction Sensor 0‑2.5V Signal Output 3 Cups S Type Integrated Anemometer Transmitter DC5V

Item Type: Wind Speed Direction SensorProduct Size: Approx. 458 x 232mm / 18 x 9.1inMaterial: ABS, Aluminum AlloyMeasurement Object: Wind Speed, Wind DirectionPower Supply Voltage: DC5VSignal Output: 0-2.5VMeasurement Range: Wind Speed 0-45m/sCable Length: Approx. 5.2m / 17.1ftAccuracy: Wind Speed: ±(0.3+0.03V)m/s, Wind Direction: ±3°Resolution: Wind Speed: 0.1m/s, Wind Direction: 1°Starting Wind Speed: 0.5m/sMaximum Power Consumption: 0.9WLoad Capacity: DC12V power supply, current output impedance 350Ω, DC24V power supply, current output impedance 900Ω, voltage output impedance 1KΩOperating Environment: Temperature -35℃-60℃, Humidity 100%RH non condensingGuard Level: IP64Cable Grade: Rated Voltage: 300V 80℃Application: Meteorology, Marine, Environment, Airport, Port, Laboratory, Industrial and Agricultural, and TransportationCalculation Formulas:0-2.5V: F=V/2.5 x A+BF: Indicates the wind speed or direction sensor value, m/s or°V: Sensor output voltage, VA: Sensor range width (upper range minus lower range)B: Minimum value of sensor range (lower limit of range)4 Installation Methods:1. Horizontal Bottom Mounting, Wind Direction Must Face Upward2. Horizontal Top Mounting, Wind Direction Must Face Upward3. Vertical Side Mounting, Wind Direction Must Face Upward4. Pole Mounting, Wind Direction Must Face UpwardWire Connection Method: Red Wire: Power Positive PoleGreen Wire: Power Negative Pole and Signal GroundWhite Wire: Wind Speed SignalBlue Wire: Wind Direction SignalStandard Comm Protocol: Serial Port Format: 8 data bits, 1 stop bit, no parity, default baud rate 9600bps, serial debugging software set to hex send and receive, minimum interval between two comms at least 500ms, CRC in the manual is the parity, 2 bytes. Default device address is 1CRC Check Steps: 1. The preset 16 bit

• Wind Speed Direction Sensor: This integrated sensor is suitable for measuring wind speed and wind direction, with a wind speed range of 0‑45m/s. Using DC5V power supply, 0‑2.5V signal output.
• 3 Cups Structure: The wind speed section adopts a 3 cups structure, and ABS material ensures high strength. It has the advantages of good startup, large range, excellent linearity, and high stability.
• Wind Direction Part: Adopts angle sensor. When the wind direction changes, the tail wing rotates the shaft to drive the sensor magnet, and the angle sensor senses the change in magnet pole orientation.
• Installation Methods: S type integrated wind speed and direction sensor, supporting horizontal bottom and top, vertical side and pole installation, the wind direction must face upwards, suitable for various scenarios.
• Secure and Reliable: With high accuracy processing, the aluminum alloy shell has high strength and light weight. External rain edges cover, built in sealing ring, and , with IP64 guard level.