Vibra-TITE - 14025 140 Permanent High Strength Anaerobic Threadlocker, 250 ml Bottle, Red

Vibra-TITE 140 High Strength Threadlocker is a red general purpose adhesive for permanent threaded assemblies. 140 locks fasteners up to 1" in diameter sealing against leakage and corrosion. It resists attack from most fuels, lubricants and most industrial gases. Eliminates double nutting and or welding of critical assemblies. The product’s viscosity can be used on fine to medium threaded parts that will not require periodic disassembly. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the bottle onto threaded parts. Fixture Speed with Primer is <5 seconds. Fixture Speed without Primer is 30 minutes at 77 degree F. Shelf Life is 12 months at 68 degree F. 24 hours at 68 degree F Full Cure Time. 200-300 inches/lbs Typical Breakaway Strength. 250-350 inches/lbs Typical Prevailing Strength. Product should be stored in a cool and dry location at temperatures between -10 degree C to 30 degree C. Optimal storage is 22 +/- 4 degree C. Shelf life is 18 months from date of manufacture when stored at 22 +/- 4 degree C. Heat and hand tools required for disassembly. 0.007 inches Maximum gap fill. 250/275 lbs Torque strength, Break/Prevail. 1.1 Specific gravity. N or T Suggested primer. 250 ml Bottle.

• Lock and seal threaded fasteners
• Stop fasteners from loosening from shock and vibration
• Performs better than lock washers, bevel washers and other forms of mechanical locking devices
• Alleviates rust-lock
• Prevent leakage