US Cargo Control Flatbed Corner Protector 8" X 8" X 36", Use Up to 4 Inch Webbing on Flatbed Edge Protectors, Protect Cargo Edges & Extend The Life of Your Straps, Useful for Drywall & Plywood

If you need to protect your cargo and straps from wear and tear, US Cargo Control's 8" x 8" x 36" Flatbed Corner Protectors is an economical yet effective tool to use for your cargo securement needs. Also known as tarp corner protectors, corner guards, and trailer corner protectors, our edge protectors have the added benefit of protecting your straps, chains, and trailer tarps. By adding it as a layer between the edge of the cargo and the tie down, cargo corner protectors distribute the pressure of the tie down (as well as extending the life of the tiedown and tarp from sharp corners). This ensures the pressure of securing the load is not concentrated in one section. Our red strap protectors have raised edges to keep the straps in place, and is 8 inches long and 36 inches wide to give your straps more protection. You can also add more than one strap on the wide corner protector to safely secure cargo. This is commonly used with ratchet straps and winch straps (use 2", 3", and 4" straps). Beside flatbed trailer applications, you can also use these corner protectors for shipping and to protect a variety of cargo such as brick, steel sheeting, drywall, plywood sheeting, and fragile items. The heavy duty corner protectors are made from high-density polyethylene (HDPE), a material that is flexible to conform to your cargo and can withstand extreme weather conditions. They are lightweight and easy to store together when you need to put them away. Can be reused over and over again. Note: it is recommended that edge protection must be used whenever a tiedown would be subject to abrasion or cutting at the point where it touches an article of cargo. The edge protection must withstand abrasion, cutting, and crushing. When you need a reliable piece of equipment to protect your straps, tarps, and cargo, look into heavy duty edge protectors from US Cargo Control.

• RELIABLE STRAP PROTECTORS FOR CARGO - Made of high-density polyethylene, these edge tie downs won't crack in cold conditions, are flexible to conform to your cargo, are highly rigid and durable for safe yet strong cargo securement, and can be reused.
• RAISED EDGES - The plastic corner protectors have raised edges to keep straps in place during transport. They're 8" long and 36" wide to give your straps more protection, and you can use more than one strap on them to safely secure cargo.
• EXTEND THE LIFE OF YOUR STRAPS - Use 2", 3", and 4" straps on these economical load edge protectors to prevent fraying and wear and tear. Ideal for a variety of cargo - from brick and steel sheeting to drywall and plywood sheeting.
• EDGE PROTECTION - It is recommended that edge protection must be used when a tiedown is subject to abrasion or cutting at the point where it touches an article of cargo. The edge protection must withstand abrasion, cutting, and crushing.
• SPECS - (1) Plastic Edge Protector | Material: High-Density Polyethylene (HDPE) | Use with 2", 3", and 4" Webbing | Color: Red | Length: 8" | Width: 36" | Depth: 8" | 85 Degrees Opening | Product Weight: 3.1 lb. each