TECHTONGDA Screen Printing Mesh Stretching Kit Screen Stretcher Tool

Specifications Crate dimension: 28"*19"*11"(70×48×28cm) Net weight: 42Lb (19kg) Shipping weight: 50Lb (23kg) Items included 1 set of Hand Screen Stretcher (006504) 1 bottle of Screen Frame Adhesive (008000) 4 pcs of 16"x20" Aluminum Frame (007261) 1.3x3 yard of 80 Mesh Count Fabric (007203) 1.3x3 yard of 120 Mesh Count Fabric (007205) 1.3x3 yard of 160 Mesh Count Fabric (007207) 1 roll of Aluminum Foil Tape (008433)

• Consisted by four 24"(60cm) wide collets. One single set can apply to any screen frames below 24"x24"(60x60cm).
• Suits for any frames below 2” thickness (common thickness is 1”-1.2”). Adjusting position bolt can meet your different requirement. Made of steel, advanced electrostatic spraying, elegant appearance, convenient in cleaning and no rust.
• 1. Put the screen frame on it, the upside must be the ragged face. 2. Adjust the height of the frame, 0.04"-0.08"(1-2mm) higher than the baffle. 3. Keeping the hand-wheel in the inside of the screw rod will assure better stretching effects. 4. Coat screen adhesive, not to thin and not to thick. 5. Stretch when the adhesive sticks hand a bit. 6. Coat the adhesive again after well stretched. 7. When the adhesive solidifies completely, then the screen stretching appliance can be dismantled.
• Wide locking bars for compressing screen are critical parts, directly influence the quality of stretching. We specially exploit concave and convex locking bars made of rubber with proper rigidity,24”width,no joints.
• Stretch size (4 sets) : below 60*60cm(24*24inch) Machine size: 80*74*22cm/31*29*9inch Net weight: 31KG /49lb Packing size: 80*74*22cm/31*29*9inch Gross weight: 36KG /53lb