SenTECH Focal Lens CO2 Diam 18mm FL 5" (5"/127mm) for Engraving Cutting Machine and Laser Cutting

➤ Note:Even though we offer a reliable package, we can not guarantee 100% the damage in the transport. If it happens, please contact us immediately, and we will give you a satisfactory reply.➤ Parameters:Material: ZnSeDiameter: 18mm Focal length: 5"/127mmThickness: approximate 2mm➤ How to measure the focal length?As we show in the picture above, the focal length means the distance between the lens and the cutting/ engraving material.➤ Installation:When you install the lens, please make sure that the convex surface is facing to the laser, and the other to the cutting material. After you install the lens, you need to adjust the lens barrel slightly and fix it at the proper place.➤ Cleaning Method:Step 1. You need to blow away the obvious pollutant, like dust.Step 2. As for the other contaminations, like fingerprint o smudges, you can use a cotton swab with acetone or isopropanol alcohol. Gently but quickly clean the surface of the optics with a damp cotton. Wait until the liquid on the surface of the lens evaporates.Step 3. For the pollutant, like oils, you can dampen an unused cotton swab or cotton ball with white distilled vinegar. Using light pressure, wipe the optic's surface with the damp cotton. Wipe excess distilled vinegar with a clean dry cotton swab. Immediately dampen a cotton swab or cotton ball with acetone. Gently wipe the optic's surface to remove any acetic acid.

• [DIAMETER]: 18mm Focal length:5"/127mm
• [THICKNESS]: approximate 2mm
• [HIGH PRECISION TECHONOLOGY]: Polishing, grinding processes, high temperature resistence
• [GOOD TRANSMITTANCE]: High quality material and exquisite coating can reduce laser loss and laser transmittance up to 99, 6%, which improves drastically the cutting speed
• [APPLICATION]: CO2 laser focal lens are used in laser processing like laser cutting, drilling, welding, engraving and various laser systems