Salice Compact Soft Close 1" Overlay Hinge Pack of 10 Hinges with Screws

This hinge can be used for new construction or to retrofit current construction. For new construction drill 35mm cup, 11mm deep, 4mm tab from the edge of the door. In the Dimension picture K+ 4mm For Retrofit applications if you have a Salice hinge that mounts with one screw to the face frame and is stamped 1" on the armand the holes that mount to the door match the hole placement pictured (there are some Salice hinges that have a different hole pattern in the door) if they match this you will can use same mounting holes to the frame. If you have the Salice hinge with 2 screws that mount to the frame its stamped with and overlay select same overlay and you can swap them and use existing holes This can be used to retrofit some other hinges, but you will have to verify some measurements to see if they will work. Accurate measurements are critical and dimensions from mfg are metric. Measurement the door overlay, measure your door, them measure the opening it covers. subtract the door width from the opening width and divide by two. result is your overlay . 2nd measurement on your door there needs to be a 35mm cup drilled for the hinge, measure from the edge of your door to the edge of the cup, it must be 2.5mm to 6mm this distance affects overlay for this hinge 3rd measurement, hinge to door mounting screws must be spaced 45mm center to center

• SALICE Soft Close Hinge With Motion control switch
• Switch dampening effect to LOW set lever to zero, Switch dampening effect to HIGH set lever to 0ne
• 1" overlay All CAM adjustable Six way door adjustment up, down, in, out, right, left
• INCLUDES QTY 10 HINGES, QTY 40 #7x5/8" flat head screws
• Note this hinge mounts with 4 #7 x 5/8" wood screws included with this order