Replacement for Hunter Ceiling Fan Remote Control K6266-02,K6266-03,K6266-04,K6266-13,Compatible with Green Receiver Only (Not for Black/Blue/White Receivers)

Replacement for Hunter Ceiling Fan Remote Control K6266-02,K6266-03,K6266-04,K6266-13,Compatible with Green Receiver Only (Not for Black/Blue/White Receivers) Pairing Instructions: (If you have pull strings) While the power to the fan is on, use the pull-chain switch on the fan to set the fan speed to the HIGH position before proceeding. Note: Most fans that require our remote do not have pull strings. Step 1: Turn off the power to the fan, either by the wall switch (or circuit breaker if necessary), and then turn it back on. (This resets the fan receiver.) Step 2: Within 3 minutes of restoring power to the fan, press and release the "Pair" button on the remote control. Do not hold down the button. The fan will turn on low to indicate successful syncing. If it does not sync, try the process again. If using the transmitter with multiple fans, repeat this process for each. If it still doesn't work, read the information below. Note: This remote is meant to serve as a replacement for the original Hunter remote control and will only work with the original Hunter receiver units. We do not provide the receiver that goes with this remote. Does not work with black, blue, or white receiver units! Compatible with Green Receiver Only (Not for Black/Blue/White Receivers)

• Replacement for Hunter Ceiling Fan Remote Control K6266-02,K6266-03,K6266-04,K6266-13
• Does not work with black, blue, or white receiver units! Green Receiver Only – This remote is designed exclusively for Hunter ceiling fans with the green receiver module Check Before You Buy – Please confirm your ceiling fan uses the green receiver before ordering to ensure compatibility.
• Pairing Instructions: (If you have pull strings) While the power to the fan is on, use the pull-chain switch on the fan to set the fan speed to the HIGH position before proceeding. Note: Most fans that require our remote do not have pull strings.
• Pairing Instructions: Step 1: Turn off the power to the fan, either by the wall switch (or circuit breaker if necessary), and then turn it back on. (This resets the fan receiver.) Step 2: Within 3 minutes of restoring power to the fan, press and release the “Pair” button on the remote control. Do not hold down the button. The fan will turn on low to indicate successful syncing.
• No_battery included (AAA 1.5V *2PCS)