Rear Tail Tidy Fender Eliminator License Plate Holder LED Integrated Brake Tail Light Turn Signal Compatible with KLX 250S 2006-2014, KLX 250SF 2009-2010

Description: -Condition:100% Brand New,High quality -Small, Compact Design -Aluminum plate laser cutting --3mm 6061 aluminum --anodizing surface --CNC-bending --Brake light is consists of 12 LED luminotron ( red light ) --License Plate light is consists of 3 LED ( white light ) -You need to manually install it with three 30mm cables. 📌Connect: 5 Wires (Black:Negative；Green:Positive; Red:Positive、Brake Light;Yellow:Right Turn Signal;Brown: Left Turn Signal） Features: --It is easy to install with a instruction. You need to remove some stock parts from your bike for use. -We suggest you tighten the screw after you fix them when you install the holder. -The colour may have 5% different from the photos shown online. -Please confirm if the item can fit your bike or not before you place the order. Fitment : KLX 250S 2006-2014 KLX 250SF 2009-2010 Important note for LED lighting: LED flashers have very low consumption and the stock flasher relay may not work properly. Some LED lighting may work just the same as the stock lighting. So you will need to add a resistor for yourself!!! ⚠️ IMPORTANT INSTALLATION NOTICE (PLEASE READ BEFORE PURCHASE): -DO NOT install directly. Please test the wires with an external battery before installation to confirm the function of each wire - Improper installation may cause malfunction or damage. During installation, thread locker MUST be used on all screws to prevent loosening due to vibration while riding -This product is intended for users with basic motorcycle modification and wiring knowledge. If you are not experienced, professional installation is strongly recommended

• 【Compatible with】 KLX 250S 2006-2014 / KLX 250SF 2009-2010
• -Condition:100% Brand New,High quality ,Small, Compact Design --Aluminum plate laser cutting, 3mm 6061 aluminum, anodizing surface, CNC-bending ,It is easy to install with a instruction. You need to remove some stock parts from your bike for use
• Brake light is consists of 12 LED luminotron ( red light ) / License Plate light is consists of 3 LED ( white light ).You need to manually install it with three 30mm cables
• 【Connect】5 Wires (Black:Negative；Green:Positive; Red:Positive、Brake Light;Yellow:Right Turn Signal;Brown: Left Turn Signal）
• ⚠️ IMPORTANT INSTALLATION NOTICE (PLEASE READ BEFORE PURCHASE): -DO NOT install directly. Please test the wires with an external battery before installation to confirm the function of each wire
• - Improper installation may cause malfunction or damage. During installation, thread locker MUST be used on all screws to prevent loosening due to vibration while riding
• -This product is intended for users with basic motorcycle modification and wiring knowledge. If you are not experienced, professional installation is strongly recommended