Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Work with Air Compressor Pump

Why need Radiator Pressure Tester Kit ?1. Troubleshooting and save money: Many problems, high engine temperature, low oil viscosity and even a damage in engine, may be caused by a small leak in a vehicle cooling system, you need check regularly and repair promptly. This kit will save much more than it has to pay, a coolant system tester is an essential tool for any mechanic or DIYer2. Time saver: Normally, it takes around 10mins to test the leak, it may fluctuate depending on the size of the tank. When you want to change the old coolant, use this pressure kit to pressurize on the reservoir, can accelerate the evacuation of coolant. Easy to operate and save time.Why choose Yemtuls Radiator Pressure Tester Kit ?1.There is no need to buy a full set of adapters for one car, Yemtuls Radiator Pressure Tester can directly connect the vent hole of the water tank. The advantage of this connection is that you can check the water tank cover leaking or not.2.When you use the hand pump to pressurize, the vehicle can't be lifted, and you can't confirm the water leakage at the bottom of the water tank, but this tool can continue to pressurize during the vehicle lifting process, so you can check the water leakage at the bottom of the water tank.NOTE:1. Please wear gloves and goggles when use;2. This coolant pressure tester kit should be used by professional or under the guidance of a professional;3. Always refer to equipment manufacturer's operation instruction, compare to the manufacturer's recommended readings.

• AN ESSENTIAL TOOL: Detect leakage for auto radiator or water tank,If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, the water tank cover, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
• WIDE USAGE: It is a universal auto tool, work with almost all brands of cars truck and other vehicles.widely compatible for Cadillac, Benz, Buick, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab and so on,no need to buy a full set of adapters for an adapter, directly connect the vent hole of the water tank. The advantage of this connection is that you can check the water tank cover leaking or not.
• WORKING PRINCIPLE: It makes the tiny holes in the radiator and water tank fully revealed by pressurization. When you use the hand pump to pressurize, the vehicle can't be lifted, and you can't confirm the water leakage at the bottom of the water tank, but this tool can continue to pressurize during the vehicle lifting process, so you can check the water leakage at the bottom of the water tank.
• ADVANTAGE: This tool is easy to operate, the quick coupler famale plug connect the air compressor pipe,the hose end connect the vent-hole of the water tank and control the pressure accurately in car cooling system by a pressure gauge. When the tank is full of water, the location of the leak can be observed and accurately located,working require a Compressed air(P≥25psi) with 1 / 4 "quick coupler famale plug.
• CUSTOMER SERVICE: Any question, please contact us by email or amazon message system, we will reply ASAP .