R-Hopped 6.03 Tightbore Barrel Modify Flat-Hop Bucking ZCI CNC Hopup S-Nub AEG R-Hop RHop

R-Hop is the single most important part in airsoft that extends your effective range to over 60m/200ft. Max range of 90m/300ft can be achieved (I.E., with M130 spring, 1.7J). This ELVISH TAC 6.03 TBB is already professionally R-Hopped. R-Hopping Steps: 1 Thoroughly clean the TBB using ethanol alcohol. 2 Professional gluing. 3 Visual and “push from inside” inspection of the R-Hop. With our S-Nub installed, ZCI CNC T6 Aluminum Hopup works well with the R-Hopped E-Tac 6.03 TBB. The Rotary wheel is capable of holding its position. The C-Clip is durable and can be repeatedly disassembled. An EXTRA R-Hop is also included as redundancy. E-Tac 6.03mm is designed for R-Hopping, with an enlarged Hop window. The groove is extended to indicate any possible barrel rotation, which can send BBs to left or right. Now you can check the alignment of the barrel without disassembling the hopup. Air seal will not be affected. Like our R-Hops, S-Nubs are made specifically for certain hopups. They just fit and require zero cutting. Moreover, you don't need to flatten the hop arm.

• R-Hop is the single most important part in airsoft that extends your effective range to over 60m/200ft. Max range of 90m/300ft can be achieved (I.E., with M130 spring, 1.7J).
• This ELVISH TAC 6.03 TBB is already professionally R-Hopped. R-Hopping Steps: 1 Thoroughly clean the TBB using ethanol alcohol. 2 Professional gluing. 3 Visual and “push from inside” inspection of the R-Hop.
• With our S-Nub installed, ZCI CNC T6 Aluminum Hopup works well with the R-Hopped E-Tac 6.03 TBB. The Rotary wheel is capable of holding its position. The C-Clip is durable and can be repeatedly disassembled.
• E-Tac 6.03mm is designed for R-Hopping, with an enlarged Hop window.
• The groove is extended to indicate any possible barrel rotation, which can send BBs to left or right. Now you can check the alignment of the barrel without disassembling the hopup. Air seal will not be affected.