Planet 16-Port Gigabit 60W Ultra PoE Managed Injector Hub, UPOE-1600G (PoE Managed Injector Hub 600W)

The UPOE-1600G is a 16-Port 10/100/1000BASE-T PoE Injector Hub that boasts a total PoE budget of 600 watts. The UPOE-1600G is a high-density, rack-mountable managed Ultra PoE injector hub with advanced PoE management functions that can be remotely managed via a web user interface. Each PoE port can deliver up to 60-watts of power over Cat.5/5e/6 Ethernet UTP cables. The unit allows data and power to transmit simultaneously to a remote 60W and 802.3at/af powered device (PD). The UPOE-1600G allows for a centralized power supply and simplifies the installation and power management of a remote network powered device. The Ultra PoE Managed Injector Hub series is a cost-effective and simple Ultra PoE solution that can be used to upgrade an existing network infrastructure to an Ultra Power over Ethernet network system without having to replace existing Ethernet Switches.The UPOE-1600G is installed between a regular Ethernet Switch and the PDs. There are a total of 32 RJ45 STP ports on the front panel of the UPOE-1600G. The bottom 16 ports operate as "Data input" interfaces while the top 16 ports operate as the "PoE (Data and Power) output" interface. With PoE, the UPOE-1600G can reduce power cable deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place.The UPOE-1600G Ultra PoE solution adopts the IEEE 802.3at/af PoE standard. Instead of delivering power over 2-pair twisted UTP be it end-span (Pin 1, 2, 3 and 6) or mid-span (Pin 4, 5, 7 and 8), the unit can supply up to 60 watts of power by using all four pairs of standard Cat.5e/6 Ethernet cabling. Utilizing the 4 twisted pairs for power allows the UPOE-1600G to deliver up to 60 watts per port to connected powered devices. The unit can deliver double the amount of power than a conventional 802.3at PoE device.

• Complies with the IEEE 802.3, IEEE 802.3u and IEEE 802.3ab Ethernet standards
• Ultra Power over Ethernet end-span/mid-span PSE
• Up to 60 watts of power on 4-pair UTP
• 52V DC, 60-watt PoE power output at maximum on each port
• Power over Ethernet hubs (PoE hubs) do NOT operate like Ethernet hubs and will not perform any switching functions.