Original H2S/H2D/H2C Vision Encoder for Bambu Lab H2 Series, 50µm Ultra-Accuracy Calibration Plate, 5-Minute Calibration, Injection-Molded-Level 3D Print Quality, High-Precision Large-Size Prints

Achieve injection-mold-level accuracy with Vision Encoder for Bambu Lab H2C/H2D/H2S Combo. Featuring 5 µm optical resolution and sub-50 µm motion calibration, it ensures consistent precision on small or large prints. Quick 5-minute setup delivers weeks of ultra-accurate, reliable performance. Note： The vision encoder plate is for motion accuracy calibration only and should not be used as a build plate for printing. After calibration, remove the plate and store it in a safe place.

• 𝐒𝐮𝐛-𝟓𝟎 µ𝐦 𝐌𝐨𝐭𝐢𝐨𝐧 𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲: The H2C/H2D/H2S vision encode uses advanced calibration technology, Delivers ultra-precise motion calibration with accuracy within 50 µm—thinner than a human hair—via a dense grid of encoder markers and 5 µm-resolution optical measurements, correcting mechanical variances across time
• 𝐃𝐢𝐬𝐭𝐚𝐧𝐜𝐞-𝐈𝐧𝐝𝐞𝐩𝐞𝐧𝐝𝐞𝐧𝐭 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧—𝐁𝐞𝐭𝐭𝐞𝐫 𝐟𝐨𝐫 𝐋𝐚𝐫𝐠𝐞𝐫 𝐏𝐫𝐢𝐧𝐭𝐬: Calibration accuracy remains consistent regardless of print size. In fact, the larger the print, the more pronounced the improvement—ideal for architectural models and full-scale functional parts
• 𝐈𝐧𝐣𝐞𝐜𝐭𝐢𝐨𝐧-𝐌𝐨𝐥𝐝 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐰𝐢𝐭𝐡 𝐀𝐮𝐭𝐨𝐦𝐚𝐭𝐞𝐝 𝐂𝐨𝐦𝐩𝐞𝐧𝐬𝐚𝐭𝐢𝐨𝐧: When used with Bambu Studio’s Auto Hole-Contour Compensation, this tool enables injection-mold-level dimensional accuracy.You’ll skip extensive post-processing and tedious adjustments—printed parts fit seamlessly together, streamlining your workflow and boosting production efficiency
• 𝐐𝐮𝐢𝐜𝐤 𝐒𝐞𝐭𝐮𝐩 𝐟𝐨𝐫 𝐖𝐞𝐞𝐤𝐬 𝐨𝐟 𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲: A simple 5-minute calibration using the H2D Vision Encoder can yield weeks of accuracy improvement—automatically compensating for belt stretch, mechanical wear, and drift without frequent recalibration
• 𝐎𝐫𝐢𝐠𝐢𝐧𝐚𝐥 𝐜𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲: Designed for Bambu Lab H2 Series (e.g., H2D, H2S,H2C), this encoder plate ensures long-term, consistent performance by continually correcting mechanical drift and preserving top-tier motion accuracy
• 𝐅𝐨𝐫 𝐨𝐩𝐭𝐢𝐦𝐚𝐥 𝐫𝐞𝐬𝐮𝐥𝐭𝐬, 𝐟𝐨𝐥𝐥𝐨𝐰 𝐬𝐢𝐦𝐩𝐥𝐞 𝐮𝐬𝐚𝐠𝐞 𝐭𝐢𝐩𝐬: remove the transparent protective film before use, ensure the toolhead camera works (no HMS errors), keep the heatbed clean and at room temperature, and store the encoder properly after calibration (do NOT use it as a build plate). For high-precision needs, biweekly calibration is recommended to sustain accuracy