Opti-Coat Slip Solution Concentrate for Tint and PPF - Makes Up To 64 Gallons Of Ready To Use Professional Film Installation Solution (32 Oz)

Opti-Coat Slip Solution Concentrate for Tint & PPF was developed to meet the demands of top professional Window Tint & Paint Protection Film Installers. It offers longer working times, enhanced slip, and better adhesive performance than soap based slip solutions. It will dry without leaving residue. Recommend for use with Opti-Coat Slip Gel. The concentrated formula is designed to be used with all brands of window tint and PPF including Opti-Coat Paint Protection Film and Opti-Coat Window Tint. It provides for The Ultimate bonding and ease of installation. Mixed to preference at 0.5 oz to 2 oz per gallon, the concentrated formula makes 1 gallon of Ready to Use Slip Solution with as little as 0.5 oz of product. DIRECTIONS: Use on a cool car, preferably in a controlled environment. Opti-Coat Slip Solution can be mixed based on usage and environmental conditions. Typical dilution is 1 to 2 oz. per gallon. Use a minimum of 0.5 oz per gallon of water. Mix 0.5 to 2 oz. Slip Solution concentrate into 1 gallon of distilled or tap water. Spray diluted Slip Solution liberally on the surface of the vehicle and on the Opti-Coat PPF or Window Tint. Keep the film lubricated during installation. If you need to reposition the film, apply Slip Solution liberally to keep the vehicle surface and film fully lubricated.

• Compatible Applications - Paint Protection Film (PPF), Automotive Window Tint, Flat Glass Window Film, and Windshield Protection Film
• Concentrated Formula - Mixed to preference at 0.5 oz to 2 oz per gallon, the concentrated formula makes 1 gallon of Ready to Use Slip Solution with as little as 0.5 oz of product.
• Wide Compatibility - It is designed to be used with all brands of window tint and PPF including Opti-Coat Paint Protection Film and Opti-Coat Window Tint. It provides for The Ultimate bonding and ease of installation
• Improved Film Positioning - Optimal balance between tack and slip. Films remain securely positioned on surfaces while allowing time for repositioning. Prevents early tack, lift lines or creases. Maintains consistent control throughout the installation.
• Extended Working Time - Longer working time than conventional slip solutions. This allows installers additional time to accurately place, align, and reposition films without rushing, resulting in higher-quality installations and reduced rework.