Omron G2R-2-S AC120(S) General Purpose Relay, Plug-In Terminals, Double Pole Double Throw Contacts, 8.6 mA at 50 Hz and 7.5 mA at 60 Hz Rated Load Current, 120 VAC Rated Load Voltage

This Omron G2R-2-S AC120(S) general purpose electro-mechanical relay receives and controls electric signals in low current applications. It has an 8-pin plug-in terminal for a socket connection. This relay has double-pole, double-throw (DPDT) contacts, a load current rating of 8.6 mA at 50 Hz and 7.5 mA at 60 Hz with a maximum load rating of 440 VAC at 10 amp, and input of 120 VAC. It has a coil-disconnection self-diagnostic LED indicator to alert users to the operating status and a nameplate for labeling. This general purpose relay is suitable for use in HVAC, appliance, and security applications.SpecificationsContact formDPDTLoad current rating8.6 mA at 50 Hz7.5 mA at 60 HzLoad voltage rating120 VACOperating temperature-40 to +70 degrees CNumber of pins8Enclosure dimensions*35.5 x 13 x 29 mm (H x W x D)Standards metUL (Underwriters Laboratories)CSA (Canadian Standards Association)VDE (Electrical, Electronic & Information Technologies)CE (European Conformity)RoHS (Restriction of Hazardous Substances)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Relay switches (also called an electrical relay or an electrical relay switch) use a small amount of power to control a larger source of power connected to electrical devices such as car motors, computers, and lighting installations. A basic relay switch has a control circuit with an electromagnetic coil and a load circuit with contacts and a lever. When current flows into the relay switch, it moves through the coil and a magnetic field is created, which causes the lever in the load circuit to move between contacts, either turning the device on or off. In a normally open (NO) relay switch, when power is supplied to the relay, the load circuit is closed and the power source connected to the relay is turned on. In a normally closed (NC) relay switch, when power is supplied to the relay, the load circuit is open and the power source connected to the relay is turned off. In other types of relay switches, non-moving parts such as transistors or semiconductors can be used as the control circuit to operate the switching mechanism. Relay switches can be controlled with an external switch, such as a light switch, or they can be connected to an automatically switched power source, such as a car ignition. One relay can operate multiple switches, and multiple relays can be operated with a single switch, with each relay operating independently from the other relays in the system. Omron manufactures and distributes electronic components, equipment, and systems for industrial automation. The company, founded in 1933, is headquartered in Kyoto, Japan.

• Electro-mechanical relay for receiving and controlling electric signals in low current applications
• 8-pin plug-in terminal for socket installation
• DPDT for simple change-over switching
• Coil-disconnection self-diagnostic LED indicator alerts users to operating status
• UL Recognized for safety, CSA, VDE, and CE certified for quality assurance, and RoHS compliant for hazardous substances