Nanoskin 99.9% Isopropyl Alcohol (IPA) 1 Gallon (32 fl oz x 4) – High-Purity Industrial/Lab Solvent for Electronics & PCB Surface Prep, Fast Evaporating, Residue-Free

Nanoskin 99.9% Isopropyl Alcohol (IPA) is a high-purity, technical-grade solvent formulated for industrial and laboratory workflows where fast evaporation and a residue-free finish are critical.Use for electronics and PCB surface prep to help remove flux residues, fingerprints, and light handling oils from circuit boards, connectors, and components. The fast flash-off supports process readiness for rework, conformal coating, bonding, or controlled handling steps.In lab and production environments, this solvent supports surface preparation by dissolving many light process contaminants such as oils, inks, and uncured polymers/adhesives. Apply using lint-free wipes or swabs and follow material compatibility guidance (spot test on sensitive plastics/coatings).For industrial and laboratory use only. Flammable liquid—use with adequate ventilation, keep away from heat/sparks/open flame, and store tightly capped. DIRECTIONS:Electronics & PCB Surface PrepPower down equipment and allow it to cool.Apply IPA to a lint-free wipe or swab—do not spray directly onto sensitive components.Wipe target areas to remove residues and handling oils; allow to evaporate completely before re-energizing.Laboratory / Industrial Surface Prep (Non-Porous Surfaces)Apply IPA to a clean cloth and wipe to remove light process residues.Allow to fully evaporate before coating, bonding, or handling steps.Spot test on sensitive plastics, painted/coated surfaces, and finished materials.Safety & HandlingIndustrial and laboratory use only.Flammable liquid & vapour; keep away from heat, sparks, and open flame.Use with adequate ventilation and store tightly capped when not in use.

• ✅ 99.9% HIGH-PURITY IPA (TECHNICAL SOLVENT): High-purity isopropyl alcohol designed for industrial and laboratory workflows where low-residue evaporation and consistent solvent performance matter.
• ✅ ELECTRONICS & PCB SURFACE PREP: Helps remove flux residues, fingerprints, and light oils from circuit boards and connectors when applied to lint-free wipes or swabs. Fast evaporation supports a residue-free finish.
• ✅ RESIDUE-FREE EVAPORATION: Flashes off quickly for process prep steps prior to rework, conformal coating, bonding, or handling—ideal when trace contamination can impact results.
• ✅ PROCESS CONTAMINANT REMOVAL: Dissolves many light process soils (oils, inks, uncured polymers/adhesives) to support consistent prep in labs, workshops, and manufacturing environments (test compatibility first).
• ✅ INDUSTRIAL/LAB USE ONLY: For industrial and laboratory solvent use only. Not intended as a household cleaner, disinfectant, or sanitizer. Flammable liquid—use with ventilation, keep away from ignition sources, and reseal promptly.