Model Airplane Spinner, rc Airplane Aluminum Alloy 3 Blade Propeller Spinner Cover Suitable for Methanol Gasoline Engine rc Airplane Plane Model for rc Model Airplane Plane Accessories (Colo

Aluminum alloy metal three-blade propeller cover Three-blade propeller cover is suitable for methanol gasoline engineThe size of the propeller cover is usually determined according to the diameter of the aircraft hood, and it is determined whether the size of the fixed plate of the propeller cover is appropriate.Don't pay too much attention to the matching between the paddle cover and the paddle, because the opening of the paddle cover can be expanded by DIY. Generally, a file can be used, if you mind, shoot carefully! ! !Gasoline propeller cover:There are two installation methods for this propeller cover:1. The conical nut is fixed to the main shaft of the engine, the conical nut is 10MM2. A 5MM screw in the propeller cover is directly fixed on the center hole of the main shaft of the engine.Please be sure to confirm the diameter and center hole size of your engine main shaft first, and then you can use it after confirmation, remember! Remember! Remember!3 inch for 26CC gasoline engine (with 10MM conical nut, one metric screw of M5*50MM, center hole of propeller cover round chassis 10MM)3.5 inch for 50CC gasoline engine (with 10MM conical screw, one metric screw of M5*50MM, The center hole of the circular chassis of the propeller cover is 10MM)4 inches for 100CC gasoline engine (with 10MM conical screws, one M5*50MM metric screw, the center hole of the circular chassis of the propeller cover is 10MM)We will be responsible for every buyer, if you find any problem with the product after receiving the package, please feel free to contact us. We will do our best to help you solve all problems.Our products are very rich, including all kinds of drones, four-axis and multi-axis drone accessories, helicopter accessories, model aircraft accessories, etc. If you don't find the accessories you need, you can contact us, we will help you to confirm whether our warehouse is still in stock

• 1. The conical nut is fixed to the main shaft of the engine, the conical nut is 10MM
• 2. airplane spinner with A 5MM screw in the propeller cover is directly fixed on the center hole of the main shaft of the engine.
• Please be sure to confirm the diameter and center hole size of your engine main shaft first, and then you can use it after confirmation, remember! Remember! Remember!
• 3 inch Model airplane spinner for 26CC gasoline engine (with 10MM conical nut, one metric screw of M5*50MM, center hole of propeller cover round chassis 10MM)
• We are responsible for every buyer, if there is any problem for the product, you can contact us at any time, we will definitely give you a satisfactory solution