Meikuler 13.56MHz Cards, RFID Smart Card / M1 Card, ISO14443A Printable Blank RFID PVC Cards for Access Control, Hotel Key cads, etc (100)

Product Details: –– Blank white cards, (no printed numbers, no magnetic strips and no slots or holes) –– Function: Read/Write protect by password –– Frequency: 13.56MHz –– Memory: 1K Byte Card –– dimensions: 85.5mm(L) x 54mm(W) x 0.8mm (Thickness) –– Thickness: 0.8mm Material: PVC –– Surface: lamination (gloss) –– Scope: access control, elevator, attendance –– Card reading distance: 2.5-10cm (Depending on the card reader) –– RF Protocol: ISO 14443A Data storage time: minimum 10 years –– Each card individually packaged, printable on all plastic card printers such as Zebra, Fargo, Evolis, Datacard and Magicard Not compatible with INKJET printers –– Works with RC522 and PN532 –– Works with KABA,SAFLOK,MIWA AND ONITY LOCKS. –– NOT compatible with HID VingCard or SaltoCard or Amiibo locks.

• –– 13.56MHz; 1K Byte Memory; ISO14443A
• –– Blank white cards, Compatible with RC522 and PN532 readers. Works with KABA,SAFLOK,MIWA AND ONITY LOCKS.
• –– Function: Read/Write protect by password, program mable via mifare-compatible readers using crypto1 authentication.
• –– All cards are pre-programmed with a unique ID, 4 Byte UID. And the 4 Byte UID is NOT changeable, factory default key: FF FF FF FF FF FF
• –– Note 1: Card must be encrypted before use, Otherwise, it cannot be used –– Note 2: NOT compatible with HID VingCard or SaltoCard or Amiibo locks.
• –– Card size: 85.5mm(L) x 54mm(W) x 0.8mm (Thickness); Each card individually packaged. Each card individually packaged, printable on all plastic card printers such as Zebra, Fargo, Evolis, Datacard and Magicard Not compatible with INKJET printers