Magnetic Encoder Module AS5048A 14 Bit PWM SPI 5V DC Angle Position Sensor for Stepper Motor Industrial Control Robotics

Specification:Item Type:Magnetic encoderResolution: 14-Bit full-scale resolutionAngle Accuracy: 0.05°Power Supply Voltage: 5V DCMaterial: Synthetic paperboardPackage List:1 x Wiring1 x Magnetic Encoder

• APPLICATION: The magnetic encoder is suitable for shaft applications where a simple two-pole magnet rotates the sensor IC or below and the 0 position can be programmed into the device with simple SPI commands. The absolute magnetic angular position resolution is 14 bits = 16384 for position measurement, and each revolution is a serial interface (SPI) with digital values
• INTERFACE: AS5048 provides PWM output and SPI or I2C interface to provide absolute angle measurement for the microcontroller. In the mechanical designing, there is no need to consider the exact pairing of the initial 0 position of the chip and the magnetic poles of the magnets it uses. Instead, the solution is: the 0 position can be programmed into the assembly through simple SPI or I2C commands (no special programming equipment). Memory inside AS5048
• HIGH PRECISION: The AS5048 magnetic rotary encoder can provide more accurate measurement than the previous Austrian microelectronics magnetic rotary encoder products. Its 14-bit measurement analog front end provides measurement resolution as low as 0.0219 degrees. Through the linearization and averaging processing of the microcontroller, the angle measurement can be accurate to 0.05 degrees
• 14-BIT: AS5048 is a 14-bit rotary position sensor (formerly called encoder) for absolute angle measurement and PWM (= pulse width modulation) at 360 degree based on non- magnetic sensor technology full-rotation output
• HIGH OPERATING TOLERANCE: AS5048 also has a very high operating tolerance, including the deviation of the center position between the chip and the paired magnet, the deviation of the air gap between the chip and the paired magnet, and the temperature change between -40°C and +150°C