LS252C Leeb Hardness Tester for Testing The Hardness of Surface Hardening Layers and Parts with Small Masses or Thin thicknesses

The LS252C is an all-in-one hardness tester with a compact size for hardness measurements on various metal materials. Featuring a C-shaped impact device with low impact force, it is suitable for testing the hardness of surface hardening layers and parts with small masses or thin thicknesses. The instrument uses advanced dual coil technology for good repeatability and high measurement accuracy. The probe has a built-in orientation sensor, which automatically compensates for measurement errors in different impact directions. The system has five hardness scales, which can be interchanged between Richter (HL), Vickers (HV), Brinell (HB), Shore (HS) and Rockwell (HRC) to avoid tedious manual calculations. The instrument uses a impact device C with many metal materials choices for wide applications. ▲Probe: Impact device C ▲Hardness Scales: HL, HV, HB, HS, HRC ▲Measurement Range :HLC: (170-960); HV(80-996); HB(80-683); HRC(20-69.5); HS(31.9-102.3); ▲Resolution: 1HL ▲Accuracy :±6 HL ▲Repeatability: 6HL ▲Display :128 * 64 dot matrix OLED ▲Power Supply :Rechargeable lithium battery 3.7V@250mAh, full charge for over 5000 continuous measurements ▲Charging Port :USB(Type-C) ▲Size :140*34*24 mm ▲Weight :66g ▲Working Temperature Range: -10~50℃，0~85%RH（no condensation） ▲Storage Temperature Range :-10~60℃，0~85%RH（no condensation）

• Impact device C for hardness measurement of small or thin metal parts The instrument uses a impact device C with a low impact force, suitable for testing small masses or thin metal parts and surface hardening layers.
• All-in-one design, compact and portable The instrument weighs only 66 grams and is easy to carry
• Direction sensor inside the probe will compensate the measurement errors in different impact directions automatically The instrument can measure at any angles. Featuring a built-in direction sensor, the probe can automatically compensate the measurement errors in different impact directions. Multi-angle measurement is easy
• Conversions to different hardness scales LS252C hardness tester provides a variety of hardness scales, which can be converted between Leeb (HL), Vickers (HV), Brinell (HB), Shore (HS) and Rockwell (HRC) eliminating the cumbersome steps of manual table lookup
• Customer re-calibration allowed Users can calibrate the standard parts to eliminate the error