LIXIL INAX A-3682/NC Bathroom Shower Head Holder with Slide Bar, Nichrome (Ni-Cr) Plated

Shower Hook for Slide Bar How to replace (1) Insert a flat precision screwdriver into the ski, pry open, and remove the cap of the bracket. (2) Use a screwdriver to unscrew the mounting screw on the bracket. (3) Pull one bracket out of the pipe. (4) Pull out the existing hook body from the pipe and insert the new hook in another direction (the larger hole is up). The "underside" sticker is attached. (5) Insert the pulled bracket into the pipe. (6) Align the bracket mounting hole with the screw hole, tighten the screw to install the cap. (7) Turn the spindle clockwise until it stops. If it is hard to turn, please temporarily twist the handle. (8) Place the handle temporarily and operate, check the position where the hook body can be firmly fixed before fixing the handle with screws. (9) Install Cap A, Cap B respectively. The hook part rotates 360°. The hook part has a top and bottom, so please rotate the hook part so that the "bottom" seal is on the bottom

• Surface treatment: plating (Ni-Cr)
• Applicable product number: BF-27A(1000), BF-27B(400)-PU, BF-27A(600), BF-27B(600)-PU, <br>BF-27A(800), BF-27B(650)-PU, BF-27B(1000)-PU, BF-27B(800)-PU, <br>BF-27B(1000)-TO, BF-27B(800)-TO, BF-27B(1200)-PU, BF-27BW(1000)-PU
• Manufacturer Part Number: A-3682/NC