Koi Pro DigiTest 4-in-1

The SuperFish Koi Pro DigiTest 4-in-1 is an accurate 4-in-1 digital meter for measuring 4 different water parameters in ponds. The multifunctional meter provides readings for the conductivity (EC), total dissolved solids (TDS), acidity (pH) and temperature (°C/°F) of your pond water quickly and easily.

SuperFish Koi Pro DigiTest 4-in-1 Features:

• Measures 4 different water values
• Acidity (pH) from 0.00-14.00 with an accuracy of 0.05 units.
• Total dissolved solids (TDS) from 0-9999 ppm ± 2%.
• Conductivity (EC) from 0-9999 μS/cm ± 2% .
• Temperature in Celsius (°C) and Fahrenheit (°F).
• The meter has an automatic 3-point pH-calibration function (4.00 - 9.18 - 6.86).
• Calibration powders are included.
• The meter has an automatic temperature compensation function.
• Auto shut-down after 5 min.

Instructions:
- Remove the protective cap before use.
- Press the on/off button.
- Dip the meter in the water up to the immersion line.
- Wait approximately 30 seconds until the measurement is numerically stable.
- Press HOLD/TEMP to log the test results.
- Remove the meter from the water to read the test results.
- The MODE/CAL button allows you to switch between the test modes.
- Pressing HOLD/TEMP for 3 seconds will toggle between °C and °F.
- Shut the meter down.
- Rinse the electrode with distilled water, dry with a tissue and place back the protective cap.
- Avoid heat and direct sunlight.

Note: The meter is NOT waterproof, never dip the meter into the water beyond the immersion line.