JVCC Low Gloss Gaffer-Style Duct Tape (J90): 4 in. (96mm actual) x 60 yds. (Dark Blue)

<p><b>JVCC J90 Low Gloss Gaffer-Style Duct Tape</b> is a low gloss finish gaffer-style duct tape. It is a matte-finish polyethylene coated cloth tape with an adhesive that removes residue free from most surfaces (surface type &amp; dwell time may affect removability). It is not as glossy as a traditional polyethylene-coated duct tape; however it would still be shinier than a vinyl-coated gaffers tape. It is also commonly referred to as AV cord tape. <b>JVCC J90 Gaffers Tape</b> is suitable for entertainment type applications (film, concerts, music, DJ's, conventions, trade shows, and photography) where minimal visibility of tape is desired. Used for protecting and anchoring cable, wires and electrical cords; sealing of equipment cases and film canisters; and in stage set-ups for marking placement (i.e. "spike" tape). Also suitable as a book binding tape for seaming and reinforcement. <b>JVCC J90</b> conforms well to irregular surfaces, and will not twist or curl. Has excellent water, vapor and abrasion resistance. JVCC J90 is a lower adhesion AV cord tape so would not adhere well for very long to difficult to bond to surfaces like carpeting and would not hold vertically on a surface for very long. It's a lower cost alternative to standard gaffer tape.</p> Warning: This product can expose you to chemicals including Carbon black (airborne, unbound particles of respirable size), which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.

• JVCC J90 Low-Gloss Gaffer-Style Duct Tape is a matte-finish polyethylene coated cloth tape with a residue-free adhesive that's well-suited for a wide range of applications where low visibility is required. Unlike traditional polyethylene-coated duct tape, JVCC J90 tape offers a matte finish, but it's still slightly shinier than vinyl-coated gaffers tape. This tape is commonly referred to as AV cord tape. It won't leave behind any residue when removed.
• Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
• Adhesive: natural rubber. Carrier/Backing: 76 mesh polyethylene coated cloth. Thickness: 11.8 mils (carrier, adhesive). Adhesion: 29 ounces per inch (to stainless steel test panel)
• Tensile Strength: 36 pounds per inch (longitudinal). Service/Operating Temperature: -31°F to 176°F. Elongation: 12%. Core: 3 inch diameter neutral
• Core: 3 inch diameter neutral