J.V. Converting JVCC Double-Sided Crepe Paper Tape Acrylic Adhesive, (DCP-02), 5 in. (120mm Actual) x 36 yds. (White)

JVCC DCP-02 Double Coated Crepe Paper Tape is a white crepe paper coated on both sides with a very high tack modified acrylic adhesive; on a white siliconized paper liner. It is used for general purpose splicing, mounting, bonding, laminating and holding of nameplates. JVCC DCP02 Double-Sided Paper Tape adheres to nearly all materials, even difficult surfaces like foams and PE films. Adhesive has a one hour dwell time. Features Benefits bull; Very good temperature, UV, aging amp; water resistance. bull; Hand tearable. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 120mm x 33m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores.

• JVCC DCP-02 Double-Sided Crepe Paper Tape is a white crepe paper coated on both sides (AKA double-coated) with a very high tack modified acrylic adhesive.
• This double-sided tape is used for general purpose splicing, mounting, bonding, laminating, and holding of nameplates.
• The tape adheres to nearly all materials, even difficult surfaces like foams and PE films. The adhesive has a one hour dwell time.
• Carrier/Backing: crepe paper. Adhesive: modified water-based acrylic. Release Liner: white 80 gr. siliconized paper.
• Thickness: 3.5 mils (carrier, adhesive) 1.5 mils (carrier). Adhesion: 58.5 ounces per inch (to stainless steel test panel). Service/Operating Temperature: -40F to 212F. Elongation: 5%. Core: 3-inch diameter neutral.