Humidity & Temperature Controller Control for Fan Attic Cabinet Room

This controller serves the purpose of monitoring and controlling temperature and humidity levels. Equipped with a buzzer and flasher alarm, it alerts users when the maximum or minimum limits are exceeded, preventing potential damage. For example, if humidity rises in a basement due to a faulty dehumidifier or water leakage, the controller triggers an alarm sound. The same applies to temperature thresholds. It also has two relay outputs for controlling temperature or humidity devices. Additionally, the controller records the maximum and minimum temperature and humidity values during operation, allowing for better customization and efficient control. It offers the flexibility of using either two separate outputs or combining them into one. This enables simultaneous control of humidity and temperature using a single fan. For instance, the fan can be set to turn on when the temperature reaches 28°C or humidity reaches 55%RH and turn off when the temperature reaches 26°C and humidity reaches 45%RH. Technical Parameters: Accuracy: ±1°C, 0.1%RH Power consumption: <3W Temperature measuring range: -20°C to +80°C Humidity measuring range: 0%RH to +100%RH Sensors: Humidity and temperature sensor with 1m wire length Power supply: AC 100-240V Output: 2 outputs with 10 Amp load Features: Two relays with one sensor and two independent outputs High and low buzzer alarm and flasher for temperature and humidity Two-color display (red for temperature and blue for humidity) Control of temperature and humidity by setting start and stop values Temperature and humidity calibration Recording of maximum and minimum temperature and humidity Timer delay for each temperature and humidity output Setting Start and Stop Temperature and Humidity Modes: You can configure the start and stop temperature and humidity values using this mode. The controller automatically identifies the heating or cooling mode, as well as the humidifier or dehumidifier mode. Heating mode: Start temperature is lo

• Temperature measuring range: 32- 230 °F (0 -110 °C) and Humidity measuring range: 00%RH～+100%RH . Power supply: AC 100-240V Output: 2 outputs with 10 Amp load. Sensor has 1m wire length.
• Higher and lower Buzzer and Flasher alarm for temperature and humidity limits. This function can alarm you when the temperature or humidity passed from your limits for preventing of any damage.
• Record maximum and minimum temperature and humidity for monitoring and analyzing.
• 2 independent Outputs (for controlling Temperature and Humidity).You can make it parallel or series with one output. 2 color display (red for temperature and blue for humidity).
• Control temperature by setting the start and stop temperature setting value. Control humidity by setting the start and stop humidity setting value. Temperature and humidity calibration.
• It has timer delay output for both temperature and humidity. It prevents damage to connected devices by avoiding rapid on/off cycles.