HLG-100H-20 100W Waterproof LED Power Supply for PFC Street Lights

Industrial Power SupplyHLG-100H-20 100W waterproof LED power supply for PFC street lightsModel: HLG-100H-20Work efficiency: 93Output ripple noise: 150mVp-pPower supply type: switching power supplyFull range AC input voltage (up to 305VAC)Built-in active PFC (power factor correction) function, when the load is greater than or equal to 60%, the power factor is >0.9Efficiency up to 93%Fully enclosed aluminum alloy shell with glue pottingWith short circuit protection/over current protection/over voltage protection/over heat protectionClass 2 power supply unit, passed LPS (limited power supply) testConstant voltage + constant current working modeDC output range 20V, 0～4.80AConstant current voltage range 60% ~ 100% set voltageOutput voltage accuracy ±1%Ripple and noise 150mVp-pEfficiency 93%Input voltage range 90～305VAC/127～431VDCInput surge current cold start, 60A/230VVoltage setting range 38~46V (Type A only, adjusted through VoADJ)Current setting range 1.4~2.28A (Type A only, adjusted through IoADJ)<;0.75mA/240VACWhen the over-current protection output current reaches 95% ~ 108% of the set current, the constant current limit will resume.When the over-voltage protection output is 47~53V, the output voltage is shut down and restored or restarted.Overheating protection: shuts off the output voltage at 100℃±10℃ (RTH2) and recovers after cooling downStart-up rising holding time: 2500mA, 50mA, 16mA/230VAC/115VAC at full load; Type B: 2500mA, 200mA, 16mAInsulation characteristics: between input terminal and output terminal: 3.75KVAC, between input terminal and shell: 2KVAC, between output terminal and shell: 0.5KVAC,Operating temperature -40～+70℃ (see output load derating curve)Vibration resistance 10～500Hz, 5G12 minutes/cycle, XYZ each axis 72 minutes eachMean time between failures ≥ 192,200 hours, MIL-HDBK-217F (25℃)

• Industrial Power Supply
• HLG-100H-20 100W waterproof LED power supply for PFC street lights