Hard-to-Find Fastener 014973323431 Spring Toggle Wings, 1/2-13, Piece-25
Produktdetails
| Artikelnummer | 215649804 | Erscheinungsdatum | 2026/04/12 | Listenpreis | €13.70 | Modellnummer | 215649804 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
- Diameter: 1/2"
- Length: 3-1/2 inches
- Material: Steel
- Finish: Zinc
- Drill Size: 1-1/4 inch
- Diameter: 1/2"
- Material: Steel
- Finish: Zinc
- Drill Size: 1-1/4 inch
- Thread Type: 13 (Coarse)
| UPC | 014973323431 |
|---|---|
| Brand | Hard-to-Find Fastener |
| Color | zinc |
| Model | 014973323431 |
| Set Name | Set of 25 |
| Head Type | Spring Toggle Wing |
| Size Name | 1/2-13 |
| Metal Type | Alloy Steel, Zinc |
| Unit Count | 1.0 Count |
| Part Number | TAS-042-25 |
| Thread Size | 1/2"-13 |
| Thread Type | Unc |
| Drive System | Spring Toggle Wing |
| Finish Types | Zinc |
| Grade Rating | Class 8.8 |
| Manufacturer | Hard-to-Find Fastener |
| Thread Class | 8.8 |
| Thread Style | Right Hand |
| Fastener Size | 1/2"-13 |
| Fastener Type | Toggle Bolt |
| Item Diameter | 0.5 Inches |
| Item Hardness | Grade 2 |
| Material Type | Alloy Steel |
| Exterior Finish | Zinc |
| Item Dimensions | 11.25 x 4.38 x 3.25 inches |
| Thread Coverage | Fully Threaded |
| Number of Pieces | 25 |
| Screw Head Style | Round |
| Screw Point Style | Spring Toggle Wing |
| Manufacturer Grade | Grade 2 |
| Set Screw Thread Type | Unified National Coarse (UNC) |
| Maximum Shear Strength | [EST] Approximately 500-700 MPa (Mega Pascals), based on typical shear strength values for steel |
| Compatible Groove Diameter | 1.25 Inches |
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
KorrekturanfrageKundenbewertungen
Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.