GOUPRC 30A Brushless ESC 2-3S Electric Speed Controller with 5V/2A BEC & XT60 Plugs for Drone Helicopter Fixed Wing DIY RC Multi-axis Aircraft (2PCS)

30A Brushless ESCcont current：30ABurst Current：40ABEC Mode：LinearBEC Output：5V/2ABattery Cell：2S-4SWeight：37gProtection Function:1.Start up failure protection: If the motor fails to start within 2 seconde of throttle application, the ESC will cut-off the output power. In this case, the throttle stick MUST be moved to the bottom again to reboot the motor. (such a situation happens in the following cases: The connection between ESC and motor is not reliable, the propeller or the motor is blocked, the gearbox is damaged, etc.) 2.Over-heat protection: When the temperature of the ESC is over about 110Celsius degrees, the ESC will reduce the output power.Throttle signal loss protection: The ESC will reduce the output power if throttle signal is lost for 1 second, further loss for 2 seconds will cause the output to the cut-off completely.

• 30A Brushless ESC electronic speed controller with XT60 connector and 3.5mm bullet plugs, brushless motor controller can power receiver and servos.
• Continuous Current: 30A / masterpiece current: 40A / BEC Mode: Linear / BEC Output: 5V/2A / Battery Cell: 2S-3S.
• Remote control programmable settings, powerful ESC protection, start-up protection, temperature protection, throttle code loss protection, over-negative He protection.
• Low feed angle setting accommodates a wider range of motor.
• NOTE & Customer Service: Please read the instruction notes carefully before usinig. If you have any question or other problems, please contact us first, we will offer you a great customer servies.