Gorilla Clear Grip Waterproof Contact Adhesive, , 3 Ounce, Clear, (Pack of 2)

Gorilla Clear Grip Waterproof Contact Adhesive, , 3 Ounce, Clear, (Pack of 2)

Product features:

• Bonds metal, glass, fabric, wood, ceramic, and more
• Fast acting: holds in just seconds
• Crystal clear, flexible, paintable, and waterproof
• Includes 2 tubes of adhesive
• Permanent bond crystal clear fast grab.
• 100% waterproof.
• For indoor/outdoor No-Run formula paintable flexible washer & dryer safe photo safe Gorilla clear grip can be adhered to many surfaces including wood, metal, stone, ceramic, glass, plastic, PVC, brick, concrete, foam, paper, rubber, fabric, and laminate.
• Note: Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. may cause damage to finished surfaces.
• Directions: All surfaces should be clean and free of dirt, grease and oil. Best if used between 50 f and 90 f. Clear grip should only be used in a well-ventilated area. Apply adhesive to each surface to be bonded.
• To maximize bond strength: wait approximately two minutes for adhesive partially dry before joining surfaces. Press surfaces firmly together.
• Note: Bond forms immediately and can be difficult to reposition.
• Cure time: allow for a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces.
• Storage tips: After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location.
• Tip: for easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap. Store away from children and animals.
• Clean-up: Wipe uncured adhesive with a dry cloth and clean with acetone, ISOPROPYL alcohol, or citrus based solvents according to manufacturer's instructions. Cured adhesive may be removed by scraping from surface. Paintable when fully cured.