FixPockets - Storage net in The Form of Pockets to FIX Without Drilling, for Utility Vehicles, Motorhomes, Boats... 2 Pockets - 40 x 25

There is always a lack of space in our utility vehicles, ... in a camper van, or boat. FixPockets is a practical accessory, a way to take advantage of unused places... It's an extra shelf, TO BE INSTALLED WITHOUT DRILLING!

• There is always a lack of space in our utility vehicles, ... in a camper van, or boat. FixPockets is a practical accessory, a way to take advantage of unused places... It's an extra shelf, TO BE INSTALLED WITHOUT DRILLING!
• The biggest advantage of this storage is its innovative way of attaching to almost any surface using only a screwdriver. Thanks to the 4 integrated nut stickers, FixPockets can be applied to: sheet metal, glass, plastic, polyester, tiles, melamine, plywood, etc. lacquered or painted wood.
• The third format: 45 x 25 with 5 pockets is intended more for transporting silicone cartridges in the utility vehicle. It can of course be used for storing other objects with a similar size.
• The pockets are made of elastic polyamide mesh, tight resistant mesh 3 x 3 mm. The recommended weight that FixPockets can support is up to 3 kg.
• The product is supplied with 3 double-sided stickers which can be stuck in the lower part (see the photo) They are just used to maintain the weight during transport and... prevent swinging. See installation advice. FixPockets also comes with 4 wood screws! If you don't want to use the stickers with an integrated nut, you can still screw the pockets into a wooden or other support.
• Installation advice: NEVER STICK THE PRODUCT ON A PAINTED WALL...LATER YOU RISK OF TAKEN IT OFF WITH THE PAINT!!! The support must be clean, dusted and degreased. Use the appropriate cleaning product. If you want to place the pockets on a sheet of metal (e.g. utility vehicle) we advise you to use acetone.
• Place the small bolts into the eyelets and tighten the integrated nut stickers. Remove the protective films and stick the FixPockets to the desired location. Press firmly in the middle to make the central part adhere. Chase the air bubbles towards the periphery. It is best to wait at least 12 hours before loading the bags.