Exhaust Clamp 3 inch Exhaust Clamp Stainless Steel Narrow Band Muffler Clamp for 3" OD Exhaust Pipe, Muffler Pipe Automotive Replacement Exhaust Clamps 2Pcs

Product Title: 3 Inch Exhaust Pipe Clamp – 304 Stainless Steel Muffler Coupler for 3" OD/ID Slip Fit Pipes, Heavy Duty Band with Bolt & Nut, Silver Product Description: This exhaust pipe coupler is designed to connect muffler and pipe sections securely on 3 inch slip fit exhaust systems. It helps create a tight, leak-resistant seal to support normal exhaust flow and engine performance. Key Features: Secure Fit for Exhaust Connections This clamp fits 3 inch outer diameter (OD) and inner diameter (ID) slip fit pipes. It provides a reliable hold between parts like the muffler and exhaust pipe. 360-Degree Sealing Design The aluminum alloy reaction block applies even pressure all around the pipe. This helps prevent pipe crushing or distortion while keeping the seal consistent without damaging the metal surface. Heavy Duty Materials Made with a 304 stainless steel band, a 10.9 grade alloy steel bolt, and a zinc plated carbon steel M17 nut with gasket. Built to handle high heat exhaust applications. Adjustable Diameter Range Fits pipe diameters from 74.5mm to 78.5mm (2.93 to 3.09 inches). This range allows a snug fit on various 3 inch exhaust pipes. Pre-Attached Hardware for Easier Install The bolt and nut come pre-attached to the band. A small hex wrench is included. This setup saves time during installation and helps keep the clamp stable on the exhaust joint. Specifications: Material: 304 stainless steel band Bolt grade: 10.9 alloy steel Nut & gasket: Zinc plated carbon steel (M17) Reaction block: Aluminum alloy Inner diameter: 3 inches (non-adjustable pipe size; clamp adjusts within range) Fixing method: Bolt and nut Adjustable range: 74.5mm – 78.5mm (2.93 – 3.09 inches) Working torque: 40 – 50 ft-lbs (54 – 68 N·m) Color: Silver Product weight: 250 g (8.82 oz) Product dimensions: 10.5 x 8.0 x 3.0 cm (4.13 x 3.15 x 1.18 inches) Package weight: 505 g (17.81 oz) What's in the box: 2 x exhaust band clamps 1 x hex wrench Where to use: Muffler to pipe connections Catalytic converter replacement Custom exhaust tuning High vibration off road exhausts Important notes for buyers: Check pipe size before ordering – Measure the outside diameter of your exhaust pipe. This clamp works with 3 inch OD/ID slip fit pipes. A correct fit helps prevent leaks. Use the right tightening tool – For final tightening, use a hand wrench or manual torque tool. Impact wrenches may over tighten and damage the 10.9 grade bolt threads. Follow torque limits – Tighten within 40 – 50 ft-lbs (54 – 68 N·m). Going above this range may break the band or damage the reaction block under vibration. Recheck after driving – After the first 50 – 100 miles, inspect and re-torque the hardware. Heat from exhaust cycles can cause metal to expand and loosen the initial grip.

• Secure Fit for Exhaust Connections: This clamp fits 3 inch outer diameter (OD) and inner diameter (ID) slip fit pipes. It provides a reliable hold between parts like the muffler and exhaust pipe.
• Heavy Duty Materials: Made with a 304 stainless steel band, a 10.9 grade alloy steel bolt, and a zinc plated carbon steel M17 nut with gasket. Built to handle high heat exhaust applications.
• Adjustable Diameter Range: Fits pipe diameters from 74.5mm to 78.5mm (2.93 to 3.09 inches). This range allows a snug fit on various 3 inch exhaust pipes.
• Pre-Attached Hardware for Easier Install The bolt and nut come pre-attached to the band. A small hex wrench is included. This setup saves time during installation and helps keep the clamp stable on the exhaust joint.
• Important notes: Check pipe size before ordering – Measure the outside diameter of your exhaust pipe. This clamp works with 3 inch OD/ID slip fit pipes. A correct fit helps prevent leaks. Follow torque limits – Tighten within 40 – 50 ft-lbs (54 – 68 N·m). Going above this range may break the band or damage the reaction block under vibration.