EVIL ENERGY 300LPH High Flow External Fuel Pump 12V Bundle with 10FT 10AN Nylon Braided PTFE Fuel Line

Bundle include: 1pc EVIL ENERGY 10AN 10ft PTFE fuel line 1pc EVIL ENERGY 300LPH 12V external fuel pump Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F EVIL ENERGY fuel pump only fit 12-volt DC batteries car. This fuel pump is intended for electronic fuel injection systems only. It is not suitable for carbureted engines. Compatible Fuel: gasoline, pump gas, race gas, diesel, E85 and alcohol/ethanol. Fuel Line Working temperature range: -76℉ to 446℉ (-60℃ to 230℃) Fuel Line Maximum Working Pressure (psi): 2000 psi Fuel Line Bursting Pressure (psi): 6000psi

• Bundle with: EVIL ENERGY 10AN 10FT nylon and stainless steel braided PTFE E85 fuel line and EVIL ENERGY 12V 300LPH High Flow 145psi External Fuel Pump
• Easy to install. Since it does not require dropping the fuel tank, fuel pump placement and fuel line routing is critical. Recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than your fuel tank, prohibits fuel flow to the pump and forces fuel to be drawn up to it. This causes the pump to work harder run hotter and can cause air to enter the fuel line will result in damage to the fuel system.
• The EVIL ENERGY 300LPH High Flow Fuel Pump designed to be used externally or as an in tank installation. A pre-filter rated at 100 microns MUST be used. Failure to use a suitable pre-filter will result in premature failure of the pump.
• PTFE Fuel Line: Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi.
• Length: 10FT(3M). Inner Diameter: 0.51in (12.95mm). Outside Diameter: 0.66in (16.9mm). Please measure before purchase! Fit for 10AN PTFE hose end fitting ONLY.