DIG 1/2 Inch Sprinkler Riser to Drip Conversion Tee Kit, 0.700 Inch OD - Pack of 10

★★★★☆ 4.0 65 Bewertungen

€21.99
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von agenciacoranto.com.ar
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€21.99
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 30.09.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von agenciacoranto.com.ar
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 232400558 Erscheinungsdatum 2026/06/21 Listenpreis €21.99 Modellnummer 232400558
Kategorie

The 1/2″ FNPT X .700″ OD Sprinkler Riser to Drip Conversion Kit, model SRC-25-700, is used to convert a 1/2” sprinkler riser into a low-flow drip irrigation zone. The SRC-25-700 includes a 1/2″ conversion adapter, a 25-PSI preset pressure regulator, and a .700″ OD swivel tee to start a drip irrigation system for landscape plantings or lawn replacement from any 1/2” sprinkler riser. Constructed of molded ultraviolet-resistant, high-impact plastic, the kit allows a 1/2” sprinkler riser to serve as the point of connection from the 1/2” riser to 1/2” dripline or drip tubing. The 25-PSI pressure regulator reduces the outgoing pressure, providing protection to the zone.


Features

  • Converts a 1/2” male pipe thread riser to a two-way .700″ OD compression connection
  • Allows the start of a drip irrigation zone from any sprinkler riser
  • Reduces incoming water pressure to the ideal working pressure for a drip system
  • Simple and easy solution for starting a drip irrigation system
  • Provides flexibility in converting a 1/2” riser into a drip irrigation zone in a few steps
  • Secure and easy installation of drip line or drip tubing without glue or clamps
  • The tee’s black insert fits all drip line or polyethylene drip tubing with .670″ OD, .700″ OD and .704″ OD
  • High-strength plastic construction with UV protection for durability and long life

Specifications

  • Kit Includes: 1 1/2” adapter, 1, 25-PSI (1.7 BAR) pressure regulator, 1 swivel tee with a 60-mesh screen, .700" OD
  • Maximum operating pressure: up to 100 PSI (7 BAR)
  • Flow rate: up to 5 GPM (19 L/H)
  • Outlet preset pressure: 25 PSI (1.7 BAR)
  • Inlet: 1/2" FNPT
  • Outlet .700" OD compression tee fits drip line & poly tubing with .690" OD, .700" OD and .704" OD
  • Screen: 60 mesh
  • Temperature range: up to 130°F
  • UPC code: 840620100298
  • Materials: high impact plastic with UV protection

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4 von 5
★★★★☆
65 Bewertungen | 27 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
75% (49)
4 Sterne
8% (5)
3 Sterne
4% (3)
2 Sterne
2% (1)
1 Stern
11% (7)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.