Chimney Fan, Fireplace Exhaust Fan Flue Fan, Chimney Smoke Evacuator, Chimney a Draft Inducer Chimney Exhaust Fan, 80W,50W

Solve smoke problems, help exhaust fireplaces, pizza ovens, wood stoves.This model is anti-freeze, anti-frost, anti-high temperature, anti-corrosion, anti-rust, and durable.Specification:Product name: electric draft inducing fanPower: 50W/ 60W/ 80WVoltage: 220VInternal diameter: 13 cm-22 cmColor: blueWeight: 2.5 kgPackage: 1 * induced draw fanPlease Note:1. Turn off the power switch when installing or removing to avoid electric shock.2. The interface to the smoke outlet must be fastened with waterproof insulating tape.3. The installation at the interface with the chimney must be firm and the interface must be tightly integrated into the chimney for the best effect.4. If the induced draft fan stops working, attention should be paid to the backflow of smoke through which smoke escapes.5. The smoke outlet is placed on the chimney. The smoke outlet must be more than 6 meters away from the fire source, otherwise the induced draft fan will be burned. The temperature of the fireplace cannot burn the insulation layer of the power cord.

• The product's operating voltage is 220V ( 110V-120V voltage, we will be equipped with a voltage converter), for flue diameter 13 cm-22 cm, and the chimney induced draft fan is used by leaving two wire ends to connect to the power source.
• The chimney induced draft fan generates suction and induces the rapid discharge of smoke to prevent the smoke from being unable to exit the flue smoothly due to the poor chimney. Not only will the smoke be discharged quickly, but it also has excellent performance.
• The outlet temperature of the chimney fan should not exceed 60 degrees. Otherwise, the induced draft fan will be burned.
• Easy to install, and does not require professional technicians to install. Install the induced draft fan on the chimney exit, run a cable in a suitable place in the room and connect it to a single 220V power supply. During installation or removal, disconnect the power supply to prevent electric shock.
• Chimney/air induction/smoke exhaust/combustion support.