Agar-agar Mixer Lab Agar Melting Hydrocolloid Duplicating Stirrer Visible Window

<p>Product Overview:<br>Duplicating machine is used for melting and mixing duplicating gel in prosthetic dentistry. It is a necessary equipment for duplicating molds. The mixing tank of the machine is made of stainless steel, which is corrosion resistant, and the property of the duplicating gel will not be changed. This is an economic machine which can melt and heat very quickly. The machine can heat, mix, cool down automatically. All operations can be done by pressing the buttons.</p> <p>Product Parameters:<br>1. Voltage: AC110V/60Hz<br>2. Mixing speed: 28rpm<br>3. Heating coil power: 800W<br>4. Motor power: 450W<br>5. Working cycle time: 1 to 2 hours<br>6. Agar mixing amount: 4.4lb-11.0lb(2kg-5kg)<br>7. Package size: 23.0"*16.5"*16.9"(43cm*42cm*58.5cm)<br>8. Product size: 12.6"*11.0"*18.9"(32cm*28cm*48cm)<br>9. Gross weight: 52.9lb(24kg)<br>Precautions for use: Press the heat preservation button after the temperature reaches the predetermined temperature and the agar is completely melted!!!</p> <p>Features:<br>1. The machine adopts a resistance wire attached to the outside of the pot and a heating strip, which can be heated evenly.<br>2. Use stainless steel inner pot, stir evenly in the pot to avoid local high temperature.<br>3. Digital thermostat with upper and lower temperature is adopted, and can be thawed at low temperature.<br>4. AGAR can be cast at the temperature near the solidification critical point to obtain accurate casting.<br>5. Fast heating, easy to use, easy to operate, good quality and long life.</p> <p>Item Included: 056510<br>Agar-agar Mixer Lab Agar Melting Hydrocolloid Duplicating Stirrer Visible Window</p>

• Duplicating mix machine is used for melting and mixing duplicating gel. It is a necessary equipment for replicating dies when it is suitable for dissolving and stirring agar elastic replication.
• You can set the heating temperature you want to achieve. The machine is already set to the proper temperature. If you need other temperature, you can adjust it. After reaching the preset temperature, the machine will remind you with a buzzer for a few seconds.
• The dental agar mixer adopts a resistance wire attached to the outside of the pot and a heating strip, which can be heated evenly. Used stainless steel inner pot and the pot is evenly stirred to avoid local parts high temperature.
• The top of the machine has a visual glass cover, which allows you to see the condition of the agar inside during the heating process. The holes allow the water vapor to be expelled in time.
• Digital thermostat with upper and lower temperature is adopted, and can be thawed at low temperature to make the agar enter the temperature near the critical point of solidification.