500A Booster Jumper Cable, Emergency Power Start Leads for Car & Van Battery Charging

[The connection procedure is as follows](1) First clamp the red wire of the start line above the red battery anode of the "rescued car".(2) Then clamp the red wire on the other end over the red battery anode of the "rescue car".(3) Clamp the black wire on the black negative battery of the "rescued car".(4) Then clamp the black wire on the black negative battery of the "rescue car".(5) Start the engine of the "rescue car" before starting the engine of the "rescue car". If it is found that the rescued vehicle still cannot start, please check whether the metal contact part is in bad contact.After starting the engine, you must still remove the starting ground wire in order, otherwise it may cause a short circuit.[The procedure for removing the line is as follows](1) First remove the black wire from the "rescued car".(2) Remove the black wire from the "rescue vehicle" again.(3) Then remove the red wire from the "rescue vehicle".(4) Finally, remove the red wire from the "rescued car".Package Includes:1 x Set of Cables

• High-Conductivity Copper Clips：Premium copper clip heads ensure excellent electrical conductivity and reliable power transfer for efficient jump-starts.
• Optimized for Engines Under 2.0L：Recommended for use with 500A/600A ground wires, making it ideal for most compact and standard passenger vehicles.
• Color-Coded for Safety：Red and black clips provide clear polarity identification, reducing the risk of incorrect connections and short circuits.
• Generous 13-Foot Cable Length：Offers ample reach for flexible vehicle positioning, allowing easy battery access in various emergency scenarios.
• Durable and Trusted Performance：Engineered for dependable performance when you need it most, providing peace of mind during roadside emergencies.