3.9 Ft Black Extension Cable Replacement Power Cord with Open End Quick Wiring Connector Compatible with InSinkErator Garbage Disposal Power Cord Kit

The power cord kit is easy to install, including a 3.9 foot long power cord, stress relief clip, wire connector, and installation instructions. Once installed, the processor can be directly plugged into a standard wall socket.Garbage Disposal Power Cord Kit Installation Steps 1. Loosen terminal plate screw and remove terminal plate 2. Reach in splice compartment and extend the black and white wires 3. Install the firmware connector on the garbage disposal.Loosen the two screws on the firmware connector and insert the cord.Reach into the splice compartment and guide the cord into the splice compartment. 4. Connect the white wire to the disposer white wire. Connect the black power cord wire to the disposer black wire. Tighten supplied wire nuts securely and then wrap with electrical tape. 5. Fasten ring terminal on the green ground wire to the green ground screw in the splice compartment.Tighten green ground screw securely. 6. Place all wires inside the splice compartment. 7. Replace terminal plate and tighten the terminal plate screw.

• This Power Cord Kit is easy to install, Which comes with a 3.9 Feet 18AWG UL Cord, 3/8" strain relief clamp, Wire Connectors. Once installed, disposer plugs into a standard wall outlet.
• Compatibility-Badger, Compact, CoverControlPlus, Essential, Excel, Select, Select Plus, Septic Assist, SupremeSS.
• Advantages: Equipped with 1 PCS quick wiring connector, it can make installation easier, safe, and reliable.
• Rated For:appliances, motors and power tools 10 Amp, 125V, 1250 Watts max applications.
• Insulation stripped for easy connection and installation. Ideal for replacement of power cords on power tools, grinder, dishwashers, freezer, and garbage disposals. Also perfect for repairing and DIY projects (such as beer brewing controller).