24V 2rpm to 150rpm Low Speed high Torque Full Metal Gearbox Encoder Worm Gear Reducer Motor(40)

Motors1pcs 24V JGY370 High Torque All Metal Gearbox Worm Gear Motor with Hall EncoderSpecification:Note: Motors with different parameters have different appearances. The lower the speed and the higher the voltage, the greater the torque. Please read the parameter list carefully before purchasing. Thanks! ! !Voltage: DC6V, DC12V, DC24VNo-load speed: 6rpm, 10rpm, 18rpm, 23rpm, 30rpm, 40rpm, 90rpm, 150rpmError: ±10%Output shaft diameter: 6mm D typeOutput shaft length: 14mmGearbox size: 46*32*25mmSee table for gearbox size detailsWiring: Note:The yellow and green wires are speed signal output wires, and cannot be connected to any power supply, otherwise it will burn out.The positive and negative power supplies of the encoder are not allowed to be connected incorrectly; the voltage is 3.3-5V.Control the motor CW or CCW by changing the positive and negative of the encoder power supply (change the red wire and white wire connection)Red wire - motor power positive (+)White wire - Negative pole of motor power supply (-)Black wire-encoder power supply negative (-) (encoder positive and negative power supply is not allowed to be wrongly connected; voltage is 3.3-5V)Blue line-encoder positive power supply (+) (encoder positive and negative power supply is not allowed to be wrongly connected; voltage 3.3-5V)Yellow wire signal feedback (11 signals for each motor revolution)Green wire signal feedback (the motor has 11 signals per revolution)

• Motors