2400W Screen Printing Drying Cabinet 6 Layers Floor Type Max Exposure Size 24 x 35 in Screen Press Warming Machine 110V

2400W 6 Layers Floor Type Screen Printing Drying Cabinet Max Exposure size 23.6 x 35 in Screen Press Warming Machine Application: This machine is mainly used for (1) drying screen plate after screen degreasing; (2) drying screen plate after coating photosensitive emulsion; (3) drying the finished screen plate; (4) short-term storage in the dark after coating photosensitive emulsion; (5) it is suitable for drying and curing products at 50-70 ℃. Parameters: Voltage:110V Power: 2400W Max frame size: 35" x 24 "(90 x 60 cm) Max. amount of drying plate: 6 pieces Highest temperature: 167℉(75℃) The machine size: 37.4"L x 25.6"W x 36"H(95 L x 65 Wx 92 H cm)

• The machine can place 6 screen frames at the same time with the outside diameter of the frame 35.4" /900 mm long,24" /600 mm wide ; Each layer height: 2.4"/60 mm; Basically meet the needs of various materials and thickness screen plate; 5 stainless steel tubes with diameter of 16mm are used for each partition; Each with a spacing of 4.5"/115mm; Can be suitable for each layer of small screen plate placed drying.
• The heater uses two 1200W heat fans; The heat fan adopts PTC heating body and strong fan to turn the heat energy,high chemical efficiency; It has the function of timing and long opening.
• The door curtain adopts the newly designed adjustable upper and lower type; take out the screen plate, the bar can be placed at any one of the four card slots according to the need. It can minimize the need to switch the curtain to avoid light.
• The overall height of the machine is 36"/92cm (including casters of 4"/10cm);It can be placed on the ground for use; Users can also remove the lower caster to place on the table.
• The overall height of the machine is 90cm (including casters of 10cm); It can be placed on the ground for use; Users can also remove the lower caster to place on the table.